I am chasing an intermittent miss. 
The 7 mm Packard wires on the 327 / 300 hp are about 8 months old with about 500 miles on them. Second set of new AC plugs.
I have terrible luck with 7 mm plug wires and AC plugs, these wires check good with an ohm meter but given the lack of separation in the wiring trough under the exhaust manifolds on both sides, I am thinking of putting 8 mm plug wires on it.
The problem is, I can't find replacement 8 mm rubber insulators for the stock GM wire supports. I don't want to drill out the holes in them as they appear to be the original and will retain them should the next owner want to return to 7 mm wires.
Does anyone know of a supplier for these 8 mm rubber insulators that will fit in the stock supports?
The 7 mm Packard wires on the 327 / 300 hp are about 8 months old with about 500 miles on them. Second set of new AC plugs.I have terrible luck with 7 mm plug wires and AC plugs, these wires check good with an ohm meter but given the lack of separation in the wiring trough under the exhaust manifolds on both sides, I am thinking of putting 8 mm plug wires on it.
The problem is, I can't find replacement 8 mm rubber insulators for the stock GM wire supports. I don't want to drill out the holes in them as they appear to be the original and will retain them should the next owner want to return to 7 mm wires.
Does anyone know of a supplier for these 8 mm rubber insulators that will fit in the stock supports?
Last edited by R66; Today at 08:03 AM.
8 mm plug wire looms for c2
0 commentaires:
Enregistrer un commentaire